Inspiration

Electrical Plug In Instruction Guide
By November 28, 2018 0 Comment

Electrical Plug In Instruction Guide

Step-By-Step Guide For Electrical Plug In

Before handling any of the igredients, please familiarise yourself with the fragrance oil chemicals & hazards, & wear the appropriate PPE (ie apron, goggles, gas mask, gloves) as stated in the Safety Data Sheet.

How to make a fragranced plug in:

-          Apply gloves

-          Choose your working area & cover any surfaces with a protective sheet (kitchen roll, newspaper etc)

-          Before we begin, ensure that you have all the components separate to one another

-          Using a (small) measuring jug or pipette, pour out 10ml of fragrance oil

-          Carefully pour this into the plug in bottle

-          You will now need to repeat the process, but use 30ml of your base oil

-          Gently pour this into the plug in bottle

-          Your bottle should now be almost full, however ensure that the liquid is not in the neck of the bottle

-          Slot the transparent bung in to the neck of the bottle

-          Now slide in the long white diffuser stick

-          Apply the white washer over the diffuser stick, so it rests on the transparent bung

-          The final step is adding the lid, ensure this is screwed on tightly, so the liquid does not leak

-          This is how your diffuser should be transported (along with the plug)

-          To activate the product, simply remove the bottle lid & slot the diffuser stick into the plug

-          Your plug in is now ready to plug in, to select the level of strength you are wanting your plug in to diffuse, slide across the tab on the 1-5 meter (1 being the lowest & 5 being the highest)

Step By Step Guide:

Step 1 – separate all your components

-          After applying gloves & protecting your work surface, it’s time to separate all of your products

-          First we will be filling the bottle, so we need a small jug / pipette to hand, as well as your chosen fragrance oil & base oil

Step 2 – filling your bottle with fragrance

-          Gently pour in 10ml of your chosen fragrance oil





Step 3 – filling your bottle with plug in diffuser base


-         Gently pour in 30ml of your diffuser base






Step 4 – add your bung


-        The bung will easily slot into the neck of the bottle







Step 5 – slot in your diffuser stick


-        The diffuser stick will easily slot into the hole in the bung





Step 6 – apply your washer


-          Slot the white washer over the diffuser stick, so that it rests on top of the bung





Step 7 – apply the lid to the bottle


-          For transportation purposes, this lid is crucial – this is how we recommend you ship to your customers





Step 8 – using your plug in

To use your plug in (no lid needed at this stage), simply slot the diffuser stick into the hole in the plug & ensure it is secured.






Step 9 – temperature level

-          Use the temperature gauge on the front (1-5) to determine to strength. 1 being the lowest & 5 being the highest

-    Step 10 – add your CLP & safety info

-          Don’t forget to provide your CLP & safety info when selling on these items.


 










Leave your thought